Welcome to Liftingtimes.com Catch the Latest Aviation Products and Services on Our Official Website of Nandan Group by CLICKING HERE >> Stay in Touch with us by Subscribing Our Email Newsletter Service by CLICKING HERE

09 August 2009

In-Flight Announcements

Occasionally, airline attendants make an effort to make the "in-flight safety lecture" and their other announcements a bit more entertaining. Here are some real examples that have been heard or reported:

"There may be 50 ways to leave your lover, but there are only 4 ways out of this airplane..."

Pilot - "Folks, we have reached our cruising altitude now, so I am going to switch the seat belt sign off. Feel free to move about as you wish, but please stay inside the plane till we land ... it's a bit cold outside, and if you walk on the wings it affects the flight pattern."

And, after landing: "Thank you for flying Delta Business Express. We hope you enjoyed giving us the business as much as we enjoyed taking you for a ride."

As the plane landed and was coming to a stop at Washington National, a lone voice comes over the loudspeaker: "Whoa, big fella. WHOA!"

After a particularly rough landing during thunderstorms in Memphis, a flight attendant on a Northwest flight announced: "Please take care when opening the overhead compartments because, after a landing like that, sure as Hell everything has shifted."

From a Southwest Airlines employee.... "Welcome aboard Southwest Flight XXX to YYY. To operate your seatbelt, insert the metal tab into the buckle, and pull tight. It works just like every other seatbelt, and if you don't know how to operate one, you probably shouldn't be out in public unsupervised. In the event of a sudden loss of cabin pressure, oxygen masks will descend from the ceiling. Stop screaming, grab the mask, and pull it over your face. If you have a small child traveling with you, secure your mask before assisting with theirs. If you are traveling with two small children, decide now which one you love more.

Weather at our destination is 50 degrees with some broken clouds, but they'll try to have them fixed before we arrive. Thank you, and remember, nobody loves you, or your money, more than Southwest Airlines."

"As you exit the plane, please make sure to gather all of your belongings. Anything left behind will be distributed evenly among the flight attendants. Please do not leave children or spouses."

"Last one off the plane must clean it."

And from the pilot during his welcome message: "We are pleased to have some of the best flight attendants in the industry ...Unfortunately none of them are on this flight...!

Heard on Southwest Airlines just after a very hard landing in Salt Lake City: The flight attendant came on the intercom and said, "That was quite a bump and I know what ya'll are thinking. I'm here to tell you it wasn't the airline's fault, it wasn't the pilot's fault, it wasn't the flight attendants' fault.....it was the asphalt!"

Another flight Attendant's comment on a less than perfect landing: "We ask you to please remain seated as Captain Kangaroo bounces us to the terminal."

After a real crusher of a landing in Phoenix, the Flight Attendant came on with, "Ladies and Gentlemen, please remain in your seats until Captain Crash and the Crew have brought the aircraft to a screeching halt up against the gate. And, once the tire smoke has cleared and the warning bells are silenced, we'll open the door and you can pick your way through the wreckage to the terminal.

Part of a Flight Attendant's arrival announcement: "We'd like to thank you folks for flying with us today. And, the next time you get the insane urge to go blasting through the skies in a pressurized metal tube, we hope you'll think of us here at US Airways."

What is Fluid Power?

1.1 WHAT IS FLUID POWER?

Utilization of fluid power is important because it is one of the three available
means of transmitting power. Other methods of transmitting power
are by utilizing mechanical means and by applying electrical energy. To
demonstrate this we will consider that we have a prime mover such as a
diesel engine on one side of the room and a mechanical contrivance on the
other. The objective is to see how, in a generic sense, power can be used
by the methods quoted above to perform the necessary mechanical work.
For mechanical power transmission, the prime mover is connected to
the device and, by use of gearboxes, pulleys, belts and clutches, the necessary
work can be performed. With the electrical method, an electrical
generator is used. The current developed can be carried through electrical
cable to operate electrical motors, linear or rotary, modulation being provided
by variable resistance or solid state devices in the circuits. For fluid
power utilization, an oil pump is connected to the engine and instead of
electrical cables, high pressure hose is used to convey pressurized fluid to
motors (again linear or rotary), pressure and flow modulation now being
provided within the motors or by means of hydraulic valves.

Any of the three methods described may be used however, if an engineering system
requires:
1. Minimum weight and volume
2. Large forces and low speeds
3. Instant reversibility
4. Remote control

then the fluid power technique will often have significant competitive advantages.

It is indeed unfortunate that design of fluid power systems is seldom taught at four-year universities in the United States at the same time as formal teaching of power transmission systems involving mechanical and electrical systems. Such comprehensive design teaching would demonstrate adequately the advantages of such systems. In some instances hydraulics
power transmission is the only technique that can be used. The most spectacular example is that of extending an aircraft’s control surface into a high velocity airstream where the only technique available is that of using fluid power actuators because of their high power to weight and volume to weight advantages.

1.2 A BRIEF HISTORY OF FLUID POWER
The performance of mechanical work using pressurized and moving fluids dates back for nearly six millennia. The Egyptians and Chinese used moving water and wind to do work and records show that the advanced civilization in China in 4000 B.C. constructed and utilized wooden valves to control water flow through pipes made of bamboo. In Egypt, the Nile River was dammed so that irrigation could be performed. The Roman Empire also used aqueducts, reservoirs and valves to carry water to cities.

The above applications did of course use dynamic properties of fluids and kinetic energy was employed to perform useful work. Fluid power is, however, customarily associated with the use of potential energy in pressurized fluids. The nearest example in antiquity which comes to mind is the quarrying of marble where holes were drilled in its surface, the holes were then filled with water and the water compressed by hammering in wooden plugs. Pressures achieved as a result were sufficiently high to fracture the marble.
Little scientific progress was made in the Middle Ages in connection with fluid power and it was not until 1648 that a Frenchman, Blaise Pascal, formulated the law that states that pressure in a fluid is transmitted equally in all directions. Practical use was made of this theory by the Englishman Joseph Bramah who built the first hydraulic press in the year 1795. Approximately
50 years later, the Industrial Revolution in Great Britain led to further development of the water press and other industrial machines.

The growth was so rapid that by the late 1860s large cities had central fluid power generating stations from which pressurized fluid was pumped to factories. The development of internal combustion engines, manual andautomatic controls, and electrical power during the latter part of the nineteenth century, however, diminished the rate of growth of centralized fluid
power plants and the practice of such activity ceased.

Interest returned to fluid power at the century’s end due to its recognized unique advantages, and in 1906 the electric system for elevating and training guns in the battleship U.S.S. Virginia was replaced by a hydraulic system. In this installation a variable speed hydrostatic transmission system was used to maneuver the guns. Modern ships now make extensive
use of fluid power for many services including winches, controllable pitch propellers, rudder control, heavy freight elevators, and raising ammunition from magazines to the guns.
The whole science of fluid power is concerned with the utilization of either a liquid or a gas as a fluid medium. Water and air were the media first used. For some time, however, hydrocarbon based fluids (i.e. oils) have been the dominant liquids. Water based liquids are still used for specialized applications where the flammability of hydrocarbon fluids is unacceptable.
In this text, we will be dealing exclusively with hydrocarbon fluids and thus knowledge of their characteristics is required. It should be noted, however, that there exists a fully developed comprehensive technology centered around pneumatic systems and there is significant industrial information and manufacturing activity. The reader is referred to other sources for this
information.

1.3 FLUID POWER APPLICATIONS, PRESENT AND FUTURE

Current activity in fluid power technology includes its use to perform transmission and control functions. The growing field of robotics is giving the engineer the opportunity to perform sophisticated design studies for equipment used in many productive sectors such as aerospace, agriculture, automated manufacture, construction, defense, energy and transportation. The
above gives an indication of present and future career opportunities for those with skills and experience in fluid power technology. With their increasing use, it is predicted that fluid power components will become less expensive, thereby further improving the competitive advantages of utilizing fluid power as a power transmission medium.

With regard to fluid power components, considerable improvements have been made in the design of seals, fluids, valves, conductors, pumps and motors. The most significant advances in hydraulic system design, however, are seen in the area of controls. Electro-mechanical controls have diversified considerably and have led to many new hydraulic applications.

More recent developments have included the use of programmable controllers in conjunction with hydraulic systems. These controllers contain digitally operated electronic components and have programmable memory with instructions to implement functions such as logic, sequencing, timing, and counting. Such modules may control many different types of machines
or processes. It is pleasing to note that fluid power applications are being extended and should increasingly improve our quality of life by, among other things, reducing the need for manual work to be performed.

Dependability has been improved by the development of easily serviced cartridge-type control valves with very long service life and minimum maintenance.

Due in part to greater demand, the above systems have been reduced in cost, high pressure piping has been minimized, performance has been improved, and there has been a simplification of maintenance procedures. As will be demonstrated in this text, the improvements in physical
equipment have been accompanied by an enhanced ability to analyze the performance of fluid power systems. Much of this development can be attributed to the dramatic improvement in computing power available to the engineer. More comprehensive analysis will provide a new level of performance for power transmission systems for machines of today and for the
future.

1.4 ADVANTAGES OF USING FLUID POWER SYSTEMS
It was stated earlier that there are advantages to using hydraulic systems rather than mechanical or electrical systems for specific applications and for those applications using large powers. Some of these advantages are given below:

1. Force multiplication is possible by increasing actuator area or working pressure. In addition, torques and forces generated by actuators are limited only by pressure and as a result high power to weight ratio and high power to volume ratio are readily achievable.

2. It is possible to have a quick acting system with large (constant) forces operating at low speeds and with virtually instant reversibility. In addition, a wide speed range of operating conditions may be achieved.

3. A hydraulic system is relatively simple to construct with fewer moving parts than in comparable mechanical or electrical machines.

4. Power transmission to remote locations is also possible provided that conductors and actuators can be installed at these locations.

5. In most cases the hydraulic fluid circulated will act as a lubricant and will also carry away the heat generated by the system.

6. A complex system may be constructed to perform a sequence of operations by means of mechanical devices such as cams, or electrical devices such as solenoids, limit switches, or programmable electronic controls.

1.5 A PROBABLE FUTURE DEVELOPMENT
An example of a future development is the design, construction and marketing of a hybrid vehicle, where, instead of using electric generator/motor and power electronics, a hydraulic hybrid design could be advantageous.

The U.S. Environmental Protection Agency has already built such a device that has achieved a fuel consumption saving of 55%. The conventional drive train from a stock 2003 four-wheel drive Ford Expedition was removed and replaced by a hydraulic drive train [1]. In addition, the 5.4 L V8 gasoline engine was replaced by a 1.9 L Volkswagen 4 cylinder diesel engine. The hydraulic system used two pumps and two accumulators. One of the pump
motors switched between pumping and driving modes and pre-charged the accumulators. During braking, the other pump motor helped to recover braking energy. The pump motor units worked together to pressurize one accumulator to 5000 lbf/in.2 and the other to 200 lbf/in.2. It is conjectured that hydraulic hybrid drive trains are particularly well suited to be used in frequently stopping vehicles such as school buses and urban delivery trucks because the system captures large amounts of energy normally lost in braking in conventionally powered vehicles.

REFERENCES
1. ASME, 2004, Mechanical Engineering, 126(9), p. 13.

Airport charges in India among lowest in world, claim private operators


Printed from

7 Aug 2009, 1735 hrs IST, IANS

HYDERABAD: Contesting the claim of private airlines that airport charges in India are among the highest in the world, private airport operators
have said that the charges are in fact among the lowest.

The Association of Private Airports Operators (APAO) Friday made this clarification and called upon the sector to work together for mutual benefit.

It cited the findings of a survey conducted last year by Jacob Consultancy, a global company specializing in airport and aviation consultancy. According to the survey, Mumbai airport was ranked at 50th place for its low airport charges in a sample of 50 worldwide representative airports.

The clarification came in the wake of recent threat by private airlines to go on strike to protest among other things high airport charges. The Federation of Indian Airlines (FIA), however, later withdrew the strike call after the government turned down their demand for a bailout package.

"In February 2009, airport charges in India were increased after eight years only once by 10 percent as against the aggregate inflation of 48 percent, based on average annual cost inflation of 5 percent," the statement by APAO said.

The association, comprising operators of Delhi, Mumbai, Hyderabad, Bangalore and Cochin airports, also claimed that airports continue to support airlines in these challenging times by exempting landing charges on aircrafts with less than 80 seats and offering 15 percent discount on landing charges if payment is made within 15 days from the date of invoice.

The association also disputed the claim that airport charges in India constitute a very high portion of an airline's operating costs. "The fact is that airport charges in India constitute only about 3.25 percent to 3.5 percent of total operating cost of airlines as compared to ATF (aviation turbine fuel), which constitutes 40 percent of the costs."

"Further, contrary to general belief, Route Navigation Facilities Charges (RNFC) and Terminal Navigation Landing Charges (TNLC) do not accrue to airport operators as they relate to navigation services provided by Air Traffic Control and are charged by AAI (Airports Authority of India)," the statement added.

APAO called up on all constituents of the aviation sector to co-operate to overcome the challenges successfully and continue to offer the passengers the best of services.
http://economictimes.indiatimes.com/News/News-By-Industry/Transportation/Airlines-Aviation/Airport-charges-in-India-among-lowest-in-world-claim-private-operators-/articleshow/4868059.cms

Sinking Air India has Rs 16000 crore debt

Printed from

Sinking Air India has Rs 16000 crore debt

NEW DELHI: Saddled with Rs 16,000 crore debt, Air India (AI) has approached government for fresh capital infusion and soft loan even as the airline launched a major cost-cutting exercise. Because of huge losses in the past, AI's net worth has already become zero.

However, in its presentation to government, AI's management has proposed a slew of measures for turnaround, which include an IPO in 2012 to raise fresh capital. Government is likely to come out with a detailed financial package on August 25.

Besides financial restructuring, the government-owned company has also chalked out a strategy to become profitable. In order to regain its market share, AI would launch a low-cost domestic service in September, CMD Arvind Jadhav said.

It is also restructuring operations and hiving off maintenance, repair and overhaul, cargo and ground-handling operations in separate companies. Jadhav said that these units will operate as standalone profit centres and provide services to other airlines also.

The airline is looking for capital infusion to soar up the comfort level of its lenders. Jadhav said that according to industry norms, debt should be up to two times of the capital. In this case, government should infuse equity of Rs 8,000 crore in the company. However, sources in the government ruled out such a huge capital infusion. According to them, government is working out a solution to infuse some capital in the airline to restore normalcy in functioning. At present, AI is finding it difficult in arranging even working capital for day-to-day operations as banks are not comfortable in extending fresh loans.

The capital infusion will also help AI restructure its debt. Jadhav said the airline is negotiating with banks and financial institutions to turn its high-cost debt of Rs 10,000 crore into low-cost. For this, the banks want the national carrier to get a comfort letter or a sovereign guarantee from the government.

Air India Express, the national carrier's low-cost entity, will commence domestic operations from September on 27 routes out of the existing 100 routes AI operates. Jadhav said that these routes were not profitable and the company was not only losing money but also passengers to the other low-cost airlines.

He said the national carrier was estimating an earning of Rs 180-200 crore through its low-cost operations on the domestic sector, which would ‘‘improve our bottomline". Gradually, Jadhav said, the AI would shift 70% of its existing domestic operations to low cost Air India Express.

On manpower rationalisation, he said the creation of subsidiary companies — engineering, maintenance and ground-handling — would lead to almost two-third of the 32,000 staff going out of airline operations, which would lead to lowering of the aircraft-to-employee ratio to match global standards.

In the recovery roadmap, the AI chief said employees' participation in the process was absolutely essential, and the unions had been made part of the Turnaround Committee, which would monitor the progress over the next three years. In fact, 50% of the committee member will be from the employees' unions. This committee will deal with nine areas including route and manpower rationalisation, operations and financial restructuring. ‘‘We are officially involving all the employees associations in the roadmap to recovery.
http://timesofindia.indiatimes.com/news/business/india-business/Sinking-Air-India-has-Rs-16000-crore-debt/articleshow/4869580.cms