Welcome to Liftingtimes.com Catch the Latest Aviation Products and Services on Our Official Website of Nandan Group by CLICKING HERE >> Stay in Touch with us by Subscribing Our Email Newsletter Service by CLICKING HERE
Showing posts with label Technology Update. Show all posts
Showing posts with label Technology Update. Show all posts

09 August 2009

What is Fluid Power?

1.1 WHAT IS FLUID POWER?

Utilization of fluid power is important because it is one of the three available
means of transmitting power. Other methods of transmitting power
are by utilizing mechanical means and by applying electrical energy. To
demonstrate this we will consider that we have a prime mover such as a
diesel engine on one side of the room and a mechanical contrivance on the
other. The objective is to see how, in a generic sense, power can be used
by the methods quoted above to perform the necessary mechanical work.
For mechanical power transmission, the prime mover is connected to
the device and, by use of gearboxes, pulleys, belts and clutches, the necessary
work can be performed. With the electrical method, an electrical
generator is used. The current developed can be carried through electrical
cable to operate electrical motors, linear or rotary, modulation being provided
by variable resistance or solid state devices in the circuits. For fluid
power utilization, an oil pump is connected to the engine and instead of
electrical cables, high pressure hose is used to convey pressurized fluid to
motors (again linear or rotary), pressure and flow modulation now being
provided within the motors or by means of hydraulic valves.

Any of the three methods described may be used however, if an engineering system
requires:
1. Minimum weight and volume
2. Large forces and low speeds
3. Instant reversibility
4. Remote control

then the fluid power technique will often have significant competitive advantages.

It is indeed unfortunate that design of fluid power systems is seldom taught at four-year universities in the United States at the same time as formal teaching of power transmission systems involving mechanical and electrical systems. Such comprehensive design teaching would demonstrate adequately the advantages of such systems. In some instances hydraulics
power transmission is the only technique that can be used. The most spectacular example is that of extending an aircraft’s control surface into a high velocity airstream where the only technique available is that of using fluid power actuators because of their high power to weight and volume to weight advantages.

1.2 A BRIEF HISTORY OF FLUID POWER
The performance of mechanical work using pressurized and moving fluids dates back for nearly six millennia. The Egyptians and Chinese used moving water and wind to do work and records show that the advanced civilization in China in 4000 B.C. constructed and utilized wooden valves to control water flow through pipes made of bamboo. In Egypt, the Nile River was dammed so that irrigation could be performed. The Roman Empire also used aqueducts, reservoirs and valves to carry water to cities.

The above applications did of course use dynamic properties of fluids and kinetic energy was employed to perform useful work. Fluid power is, however, customarily associated with the use of potential energy in pressurized fluids. The nearest example in antiquity which comes to mind is the quarrying of marble where holes were drilled in its surface, the holes were then filled with water and the water compressed by hammering in wooden plugs. Pressures achieved as a result were sufficiently high to fracture the marble.
Little scientific progress was made in the Middle Ages in connection with fluid power and it was not until 1648 that a Frenchman, Blaise Pascal, formulated the law that states that pressure in a fluid is transmitted equally in all directions. Practical use was made of this theory by the Englishman Joseph Bramah who built the first hydraulic press in the year 1795. Approximately
50 years later, the Industrial Revolution in Great Britain led to further development of the water press and other industrial machines.

The growth was so rapid that by the late 1860s large cities had central fluid power generating stations from which pressurized fluid was pumped to factories. The development of internal combustion engines, manual andautomatic controls, and electrical power during the latter part of the nineteenth century, however, diminished the rate of growth of centralized fluid
power plants and the practice of such activity ceased.

Interest returned to fluid power at the century’s end due to its recognized unique advantages, and in 1906 the electric system for elevating and training guns in the battleship U.S.S. Virginia was replaced by a hydraulic system. In this installation a variable speed hydrostatic transmission system was used to maneuver the guns. Modern ships now make extensive
use of fluid power for many services including winches, controllable pitch propellers, rudder control, heavy freight elevators, and raising ammunition from magazines to the guns.
The whole science of fluid power is concerned with the utilization of either a liquid or a gas as a fluid medium. Water and air were the media first used. For some time, however, hydrocarbon based fluids (i.e. oils) have been the dominant liquids. Water based liquids are still used for specialized applications where the flammability of hydrocarbon fluids is unacceptable.
In this text, we will be dealing exclusively with hydrocarbon fluids and thus knowledge of their characteristics is required. It should be noted, however, that there exists a fully developed comprehensive technology centered around pneumatic systems and there is significant industrial information and manufacturing activity. The reader is referred to other sources for this
information.

1.3 FLUID POWER APPLICATIONS, PRESENT AND FUTURE

Current activity in fluid power technology includes its use to perform transmission and control functions. The growing field of robotics is giving the engineer the opportunity to perform sophisticated design studies for equipment used in many productive sectors such as aerospace, agriculture, automated manufacture, construction, defense, energy and transportation. The
above gives an indication of present and future career opportunities for those with skills and experience in fluid power technology. With their increasing use, it is predicted that fluid power components will become less expensive, thereby further improving the competitive advantages of utilizing fluid power as a power transmission medium.

With regard to fluid power components, considerable improvements have been made in the design of seals, fluids, valves, conductors, pumps and motors. The most significant advances in hydraulic system design, however, are seen in the area of controls. Electro-mechanical controls have diversified considerably and have led to many new hydraulic applications.

More recent developments have included the use of programmable controllers in conjunction with hydraulic systems. These controllers contain digitally operated electronic components and have programmable memory with instructions to implement functions such as logic, sequencing, timing, and counting. Such modules may control many different types of machines
or processes. It is pleasing to note that fluid power applications are being extended and should increasingly improve our quality of life by, among other things, reducing the need for manual work to be performed.

Dependability has been improved by the development of easily serviced cartridge-type control valves with very long service life and minimum maintenance.

Due in part to greater demand, the above systems have been reduced in cost, high pressure piping has been minimized, performance has been improved, and there has been a simplification of maintenance procedures. As will be demonstrated in this text, the improvements in physical
equipment have been accompanied by an enhanced ability to analyze the performance of fluid power systems. Much of this development can be attributed to the dramatic improvement in computing power available to the engineer. More comprehensive analysis will provide a new level of performance for power transmission systems for machines of today and for the
future.

1.4 ADVANTAGES OF USING FLUID POWER SYSTEMS
It was stated earlier that there are advantages to using hydraulic systems rather than mechanical or electrical systems for specific applications and for those applications using large powers. Some of these advantages are given below:

1. Force multiplication is possible by increasing actuator area or working pressure. In addition, torques and forces generated by actuators are limited only by pressure and as a result high power to weight ratio and high power to volume ratio are readily achievable.

2. It is possible to have a quick acting system with large (constant) forces operating at low speeds and with virtually instant reversibility. In addition, a wide speed range of operating conditions may be achieved.

3. A hydraulic system is relatively simple to construct with fewer moving parts than in comparable mechanical or electrical machines.

4. Power transmission to remote locations is also possible provided that conductors and actuators can be installed at these locations.

5. In most cases the hydraulic fluid circulated will act as a lubricant and will also carry away the heat generated by the system.

6. A complex system may be constructed to perform a sequence of operations by means of mechanical devices such as cams, or electrical devices such as solenoids, limit switches, or programmable electronic controls.

1.5 A PROBABLE FUTURE DEVELOPMENT
An example of a future development is the design, construction and marketing of a hybrid vehicle, where, instead of using electric generator/motor and power electronics, a hydraulic hybrid design could be advantageous.

The U.S. Environmental Protection Agency has already built such a device that has achieved a fuel consumption saving of 55%. The conventional drive train from a stock 2003 four-wheel drive Ford Expedition was removed and replaced by a hydraulic drive train [1]. In addition, the 5.4 L V8 gasoline engine was replaced by a 1.9 L Volkswagen 4 cylinder diesel engine. The hydraulic system used two pumps and two accumulators. One of the pump
motors switched between pumping and driving modes and pre-charged the accumulators. During braking, the other pump motor helped to recover braking energy. The pump motor units worked together to pressurize one accumulator to 5000 lbf/in.2 and the other to 200 lbf/in.2. It is conjectured that hydraulic hybrid drive trains are particularly well suited to be used in frequently stopping vehicles such as school buses and urban delivery trucks because the system captures large amounts of energy normally lost in braking in conventionally powered vehicles.

REFERENCES
1. ASME, 2004, Mechanical Engineering, 126(9), p. 13.

25 June 2009

A Safety Training Video

11 March 2009

U.S. Air Force HDPLP Vehicle - Unit One ( complete operation )

U.S. Air Force HDPLP Vehicle - Unit One

09 February 2009

A 380 Hi Lift from FFG

One of the earliest successes in the live trials of an A380 Hi Lift were done by Hamburg based FFG. Tis video is an apt one which showcase their technical innovation and make this company a great bet for you to buy youe expensive A380 Hi Lift. 




A 380 Hi Liuft from beilhack


A 380 Deployment video from Aeromobiles

A 380 from Tesco



Airbus brief on A380 servicing

This presentation given in 2005 contains the details from the horses mouth and puts an end to all the speculation on the A380 catering.

08 February 2009

A 380 Catering Challanges

NANDAN's LIFTING TIMES: The Blog from Nandan Group

This Blog accumulates the body of knowledge that has been done by specialized companies on the A380. The catering to the plane has its great challanges. 

FFG Has also released a documentary video on this mammoth vehicle. FFG Hamburg is one of the first to create the Hi Lift for Luftansa

GSE awaits A380

By Sandra Arnoult 
Frankfurt
Airport Equipment & Technology, Summer 2005

If you can handle the A340-600, the 777 or the 747, then you can handle the A380 from the GSE side," says Bernd Scholz, senior manager-equipment for Fraport, the management company for Frankfurt International Airport. That in a nutshell describes the attitude of many airport officials preparing for the arrival of the first A380 that took to the skies for the first time on a sunny April day in Toulouse.

The only two pieces of equipment that need to be redesigned to accommodate the aircraft are an upper-deck catering unit to reach the second level and high-powered tow tractors with the muscle to move the behemoth down a taxiway. Seven manufacturers are offering towbar and towbarless tractorsmany already in operationthat can handle the A380. They are Douglas, Goldhofer, TLD, Schopf, Koegel Kamag, FMC and Bliss Fox. The tractors also are compatible with existing widebody aircraft. A tow tractor for the A380 must operate at 20 mph and produce about 1,200 hp.

While the main deck is compatible with existing equipment, the upper deck will require service from a catering truck able to extend 8 m. above ground level, which is about 3 m. higher than a 747. "Catering is the absolute bottleneck," says Scholz. Prototypes are available for this type of vehicle from nine manufacturers: Inutsuka, FFG, Mallaghan, Smith TE, CATCON, HTR, Saxon, Tesco and Beilhack. These trucks also are compatible with widebodies.

"We advise using an upper-deck catering vehicle," declared Richard Carcaillet, Airbus director-A380 product marketing, at a meeting in Frankfurt the day after the first flight of the aircraft. "All the equipment could serve other aircraft."

Airbus has worked diligently with airports and GSE providers over the past several years in an effort to ensure that the overall aircraft design will be relatively compatible with existing infrastructure. The manufacturer even has developed a computer program that will take the dimensions of existing pieces of GSE and determine compatibility with the A380.

Scholz says a concern was noted early in the design stages that GPU servicing points might not be accessible from the ground. Members of the working group convinced Airbus "to change some bells and whistles" and the problem was solved (see related chart), bringing the service points more in line with a 747, he says.

There is grand talk among the prospective operators of the new aircraft about lounges with showers on the upper deck, individual cabins complete with butler service, double beds, bars or workout rooms. Such oneupmanship is standard procedure for an airplane that will be considered the flagship of an international carrier. But thus far the true configurations and cabin service options are being held close to the vest by all future operators, making it somewhat of a challenge for ground service people to plan for all contingencies and pinpoint all of the service needs.

For example, does the carrier intend to have a full galley on the upper deck or to use an onboard lift to haul food from the main deck? Will cleaning crews need to access the aircraft from the lower deck and use the interior stairwell to haul cleaning equipment up and trash back down? The answer to these questions could provide more guidance about airport GSE as to the amount and type of equipment required.

Some airports, such as Dubai, are well on their way to obtaining the needed equipment, while otherslike Frankfurtcontinue to test GSE. Rimzie Ismail, manager-marketing and business development for Dept. of Civil Aviation Dubai, says the airport is investing in five high-loaders that can be elevated to 8.1 m. with the ability to move sideways and over the wing. The equipment is undergoing simulator testing and she expects a decision to be made by year end. The airport also is investing in special hydrants and fueling equipment.

The A380 can be configured for about 500 seats with two or three classes of service, or up to 850 seats in a single-class layout. Airbus estimates that the aircraft provides 35% more capacity than its closest competitor. That means planning and delivering catering, cleaning and servicing, and loading and unloading baggage for a high volume of passengers. But airport officials, who literally have been planning for years, believe they will be up to the challenge.

The overall design, balance and configuration of the doors are geared for a 90-min. turnaround using only two bridges, according to Airbus officials. "It doesn't require much more than a 747. We're not recommending anything more than two bridges," Carcaillet tells AE&T. "You don't need three, four or five bridges to board the A380. This is a legend." Still, he concedes that some carriers will opt for direct access to the upper deck if only as a way of "product differentiation."

There are companies that are prepared to provide upper-deck boarding systems and some airports continue to do comparison shopping.

FMC Technologies is developing an upper-deck boarding bridge that is in the testing phase at company headquarters in Ogden, Utah. Engineering Manager Steve Nestel says FMC has built a mockup of the upper deck of an A380 in order to demonstrate the capabilities of the UD boarding bridge. The mockup also can be used as a training device for bridge operators. The bridges can be adapted to serve both widebody and narrowbody aircraft, he says.

Alex Pfurr, director, ThyssenKrupp Airport Systems SA, says that company offers a boarding system that can incorporate an escalator into a boarding bridge. "Customization is important. You need to access the rear doors and to speed up the [boarding] process," he notes.

Fraport is testing a ThyssenKrupp boarding bridge that features an automated docking device developed by Indal Technologies. The automated system takes out the "human factor" and enables the bridge to connect to the aircraft via a system of laser-guided lights and cameras that steer it into place at the aircraft door. "The automated docking and retraction improves ontime arrivals and departures," says Paul Upp, director-sales and marketing for Indal. "The smoother, consistent operation extends the life of the bridge, reduces damage and labor costs."

Carcaillet believes that by the time the first A380 is placed into service, everything will be in place for operations. "Airports will be ready when they need to be ready. It is a business plan, like any other investment."

The A380 marks a new age in air travel that is likely to spark fierce competition among the leading airports of Europe, says Wilhelm Bender, chairman of the executive board of Fraport AG, the company that operates Frankfurt International Airport. Bender was a keynote speaker at a recent conference aptly titled "Welcoming the A380" held in Frankfurt.

Lufthansa, which is based at Frankfurt, has firm orders for 15 A380s with the first delivery scheduled for 2007. In preparation for that first flight, a new A380 maintenance facility to be operated by Lufthansa Technik is planned for the airport. The current runway system meets standards for the aircraft but apron and ramp areas will require new markings.

"To cut costs, the members of the top three alliances will redirect the bulk of their long-haul transfer traffic into a handful of megahubs, sidelining many of today's secondary hubs," says Bender. "The trend will be accelerated by open skies, deregulation, mergers and the introduction of megaplanes such as the A380, which only the largest hubs with significant feeder capacity will be equipped to handle."

He says the competition will be "most noticeable" in Europe with the Star Alliance and Lufthansa focused on Frankfurt, Munich and Zurich; Air France and KLM/SkyTeam focused on Paris Charles De Gaulle and Amsterdam, and British Airways/oneworld focused on London Heathrow.

The only two pieces of equipment that need to be redesigned to accommodate the aircraft are an upper-deck catering unit to reach the second level and high-powered tow tractors with the muscle to move the behemoth down a taxiway. Seven manufacturers are offering towbar and towbarless tractorsmany already in operationthat can handle the A380. They are Douglas, Goldhofer, TLD, Schopf, Koegel Kamag, FMC and Bliss Fox. The tractors also are compatible with existing widebody aircraft. A tow tractor for the A380 must operate at 20 mph and produce about 1,200 hp.

While the main deck is compatible with existing equipment, the upper deck will require service from a catering truck able to extend 8 m. above ground level, which is about 3 m. higher than a 747. "Catering is the absolute bottleneck," says Scholz. Prototypes are available for this type of vehicle from nine manufacturers: Inutsuka, FFG, Mallaghan, Smith TE, CATCON, HTR, Saxon, Tesco and Beilhack. These trucks also are compatible with widebodies.

"We advise using an upper-deck catering vehicle," declared Richard Carcaillet, Airbus director-A380 product marketing, at a meeting in Frankfurt the day after the first flight of the aircraft. "All the equipment could serve other aircraft."

Airbus has worked diligently with airports and GSE providers over the past several years in an effort to ensure that the overall aircraft design will be relatively compatible with existing infrastructure. The manufacturer even has developed a computer program that will take the dimensions of existing pieces of GSE and determine compatibility with the A380.

Scholz says a concern was noted early in the design stages that GPU servicing points might not be accessible from the ground. Members of the working group convinced Airbus "to change some bells and whistles" and the problem was solved (see related chart), bringing the service points more in line with a 747, he says.

There is grand talk among the prospective operators of the new aircraft about lounges with showers on the upper deck, individual cabins complete with butler service, double beds, bars or workout rooms. Such one-upmanship is standard procedure for an airplane that will be considered the flagship of an international carrier. But thus far the true configurations and cabin service options are being held close to the vest by all future operators, making it somewhat of a challenge for ground service people to plan for all contingencies and pinpoint all of the service needs.

For example, does the carrier intend to have a full galley on the upper deck or to use an onboard lift to haul food from the main deck? Will cleaning crews need to access the aircraft from the lower deck and use the interior stairwell to haul cleaning equipment up and trash back down? The answer to these questions could provide more guidance about airport GSE as to the amount and type of equipment required. Some airports, such as Dubai, are well on their way to obtaining the needed equipment, while otherslike Frankfurtcontinue to test GSE. Rimzie Ismail, manager-marketing and business development for Dept. of Civil Aviation Dubai, says the airport is investing in five high-loaders that can be elevated to 8.1 m. with the ability to move sideways and over the wing. The equipment is undergoing simulator testing and she expects a decision to be made by year end. The airport also is investing in special hydrants and fueling equipment.

The A380 can be configured for about 500 seats with two or three classes of service, or up to 850 seats in a single-class layout. Airbus estimates that the aircraft provides 35% more capacity than its closest competitor. That means planning and delivering catering, cleaning and servicing, and loading and unloading baggage for a high volume of passengers. But airport officials, who literally have been planning for years, believe they will be up to the challenge.

The overall design, balance and configuration of the doors are geared for a 90-min. turnaround using only two bridges, according to Airbus officials. "It doesn't require much more than a 747. We're not recommending anything more than two bridges," Carcaillet tells AE&T. "You don't need three, four or five bridges to board the A380. This is a legend." Still, he concedes that some carriers will opt for direct access to the upper deck if only as a way of "product differentiation."

There are companies that are prepared to provide upper-deck boarding systems and some airports continue to do comparison shopping.

FMC Technologies is developing an upper-deck boarding bridge that is in the testing phase at company headquarters in Ogden, Utah. Engineering Manager Steve Nestel says FMC has built a mockup of the upper deck of an A380 in order to demonstrate the capabilities of the UD boarding bridge. The mockup also can be used as a training device for bridge operators. The bridges can be adapted to serve both widebody and narrowbody aircraft, he says.

Alex Pfurr, director, ThyssenKrupp Airport Systems SA, says that company offers a boarding system that can incorporate an escalator into a boarding bridge. "Customization is important. You need to access the rear doors and to speed up the [boarding] process," he notes.

Fraport is testing a ThyssenKrupp boarding bridge that features an automated docking device developed by Indal Technologies. The automated system takes out the "human factor" and enables the bridge to connect to the aircraft via a system of laser-guided lights and cameras that steer it into place at the aircraft door. "The automated docking and retraction improves ontime arrivals and departures," says Paul Upp, director-sales and marketing for Indal. "The smoother, consistent operation extends the life of the bridge, reduces damage and labor costs."

Carcaillet believes that by the time the first A380 is placed into service, everything will be in place for operations. "Airports will be ready when they need to be ready. It is a business plan, like any other investment."

A380 MAY SPARK FIERCE COMPETITION IN EUROPE

The A380 marks a new age in air travel that is likely to spark fierce competition among the leading airports of Europe, says Wilhelm Bender, chairman of the executive board of Fraport AG, the company that operates Frankfurt International Airport. Bender was a keynote speaker at a recent conference aptly titled "Welcoming the A380" held in Frankfurt.

Lufthansa, which is based at Frankfurt, has firm orders for 15 A380s with the first delivery scheduled for 2007. In preparation for that first flight, a new A380 maintenance facility to be operated by Lufthansa Technik is planned for the airport. The current runway system meets standards for the aircraft but apron and ramp areas will require new markings.

"To cut costs, the members of the top three alliances will redirect the bulk of their long-haul transfer traffic into a handful of megahubs, sidelining many of today's secondary hubs," says Bender. "The trend will be accelerated by open skies, deregulation, mergers and the introduction of megaplanes such as the A380, which only the largest hubs with significant feeder capacity will be equipped to handle."

He says the competition will be "most noticeable" in Europe with the Star Alliance and Lufthansa focused on Frankfurt, Munich and Zurich; Air France and KLM/SkyTeam focused on Paris Charles De Gaulle and Amsterdam, and British Airways/oneworld focused on London Heathrow.

From http://www.atwonline.com/magazine/article.html?articleID=1419





Truck Loading Conveyor

Nandan's Truck Loading Conveyor is an asset to ergonomic improvement. Please see the brochure below or the movie to see how it can help in your cause








02 February 2009

Scissor Lift training video

29 January 2009

Puzzle Parking

Automated Car Parking Animation

Carousal Parking

Brazilian Car Park Animation

Here is a beautiful peace composed in clay figurines. gives the message very well!



Automatic Parking System from Brazil

Automated Car Park Animaion

Automatic Car park in Japan

Metro Trolley in New Zealand

Carousal Parking in Japan